
- Order number: ccd10122
The 2000A current clamp is automatically detected by the PicoScope software when it is connected to the oscilloscope and is automatically set in the software without the need for manual range switching. The current clamp is automatically calibrated by the software when connected to the oscilloscope, eliminating the need for manual zeroing.
Typical applications
The wide range of this clamp allows measurement of currents from less than 1 A up to 2000 A. It can be used with a PicoScope for many applications:
- Battery testing with PicoDiagnostics software
- Relative compression testing
- Starter motor testing
- Alternator output testing
- Hybrid and EV electric motor current
- The 2000 amp current clamp also features automatic range selection, allowing the TA388 to be used for many applications that would normally require a low amp current clamp, such as injector and ignition current testing.
Eigenschaften | Spezifikationen |
Modell | PicoBNC+ Strommesszange: 2000A AC/DC |
Abmessungen |
|
Gesamte Länge inkl. Kabel | 2,85m |
Öffnung | 32mm Durchmesser |
Gewicht | 320g |
Elektrisch |
|
Messbereich | ±2000A DC oder AC Spitze |
Stromüberlastung | 2200A DC (für eine Minute) |
Maximale Spannung | 300 V |
Hardware Bandbreite | 20 kHz |
Temperaturkoeffizient | ±0.1% of reading / °C |
Hardware Auflösung | ± 100 mA bis zu 200 A ± 500 mA darüber |
Genauigkeit | 1% ± Offset bis zu 1500 A 5% von 1500 A bis 2000 A |
Arbeitstemperaturbereich | 0 °C bis 50 °C |
Umgebungstemperaturbereich | –20 °C bis +85 °C |
Arbeits-Luftfeuchtigkeitsbereich | 15% bis 85% (nicht Kondensierend) |
Bandbreite | Frequenzbereich DC bis zu 20 kHz (–1 dB) |
Kalibrierung / Nullstellung | Automatisch bei Start |